Home / News / Detail
1. use appropriate tools to open holes in the ceiling according to the corresponding fixture size.
2. the wire and the lamp terminal should be connected correctly according to the instruction manual. It is best to install and operate by a professional electrician. Please follow the safety rules of the wiring.
3. Manually insert the spring clips on both ends of the ultra-thin LED downlight into the ceiling openings of the size.
4. After confirming that the hole and home downlight are attached and properly wired, put down the spring button on both sides of the LED downlight to turn on the power.
Immediately after opening the LED downlight package, check that the product is in good condition. Failures caused by non-human or specified requirements may be returned to the retailer or returned directly to the manufacturer for replacement.
Turn off the power before installation to ensure that the switch is closed to prevent electric shock. Do not touch the surface of the lamp after the lighting is on. This lamp should be avoided in the place of heat source and hot steam and corrosive gas to avoid affecting the life. Please confirm the applicable power supply according to the installation quantity before use.
This luminaire is limited to indoor use. Please pay attention to the waterproof installation before the installation to ensure that the installation position can withstand 10 times the weight of the product. The product uses a high-voltage (110V/220V) power supply lamp cup, it is not suitable to work in frequent on-off state, which will affect its life. Installed in a flat place without vibration, no swing, no fire hazard, pay attention to avoid falling from high altitude, hard object collision, knock.
If it is not used for a long time, the LED downlight should be stored in a cool, dry and clean environment. It should not be stored and used in wet, high temperature or inflammable and explosive places.
© Copyright 2018 Zhongshan Wharlgiz Lighting Co.,Ltd